Taking up for the Aerostar in 1994, the Ford Windstar was considered one of two minivans offered by the Ford Motor Co. till 2004 (Mercury Villager was the opposite). The unofficial focus of the Windstar was to supply a family automobile with extra consideration paid to inside comforts. A part of that effort was noticeable within the department of car audio. The Windstar got here commonplace with a more highly effective sound system than was ever offered in an Aerostar. Windstar house owners who seek specific capabilities via an aftermarket radio can set up it with little earlier experience.

Ford Windstar Radio/Stereo Installation Procedures

1. Disconnect the grounding cable (black cable connecting the negative battery terminal with the body of the Windstar) with a 10 mm socket and ratchet.
2. Plug the stereo wiring (now free after the removing of the factory radio) into the leads of the wiring harness adapter. The adapter will convert the platform of the Ford stereo wiring to be acceptable to aftermarket components.
3. Slide the faceplate adapter or set up sleeve from the Ford stereo set up equipment into the stereo mounting dock of the Windstar. On first-technology Windstars (1995 by means of 1998 fashions) use an installation sleeve; on other models use a faceplate adapter.)
4. Join the wiring harness adapter leads into the again of the brand new radio. Plug the antenna cable into the FM antenna outlet on the rear panel of the aftermarket radio.
5. Place the again of the new stereo at the opening of the stereo mounting dock. Slide the stereo straight into the opening until the stereo snaps into place in the dock.
6. Exchange the grounding cable clamp over the unfavorable lead submit, and tighten the clamp with the socket and ratchet.

Ford Windstar Radio/Stereo Installation Tips

You should use the Ford installation sleeve with all Windstars, but it surely’s particularly useful with first-generation models. Windstars for mannequin years 1999 through 2004 will profit from the trim offered by a faceplate adapter as far as appearance of the completed installation. First-era models won’t allow for a faceplate adapter trim; the opening within the dashboard meets directly with the stereo mounting dock.